Model 411

Products

Intercom Entry Systems

400 Series

Model 411

Model 411 Euro-Style Entry System with a Selection of Keypad Types w/ Adjustable Camera

Overview

Solid brass (1/4”) faceplate for phone systems and intercoms
Includes 3.6 mm camera on adjustable bracket (25 deg left or right adjustment)
Specify keypad type desired:
- Serial ASCII output 411-A
- Output for C2N-IIF 411-CR
- Stand-alone 12 button 411-S12
- 26 Bit Wiegand output 411-W
Face plate dimensions: 8.125” x 5.125” (h w)
Back box dimensions: 7.25” x 4.25” x 4.25” (h w d)

EXAMPLE PART NUMBER:

411-W-CR-CC-PB
Model 411 with Wiegand keypad , Crestron intercom, and color camera, in polished brass finish

MODEL 411-X Includes bracket for Panasonic KX-T30865 door unit
MODEL 411-X-CR - Crestron version. Includes C2N-IIF.
MODEL 411-X-PAN - Compatible with Panasonic KSU’s. Includes speaker microphone, and circuit board.
MODEL 411-X-TES - Telephone Entry System (TES) creates a communication link between the front door and every telephone in the house. Special telephones are not required. Includes relay for gate control. More Details
MODEL 411-X-VIK - High performance version using Viking components. More Details

NOTE: The “X” in the part numbers above is to specify the keypad type. See "Keypad" tab

OTHER INTERCOM OPTIONS
MODEL 411-X-ELN - Compatible with Elan. Includes COM2 door station model DSF3. Option: model DSC3 with balun module
MODEL 41X-X-MIT - Compatible with Mitel 3000 telephone systems. Includes speaker, mic and circuit board from Mitel doorbox.
MODEL 411-X-NEC - Compatible with NEC. Includes NEC door station model 922450
MODEL 411-X-OnQ - Compatible with OnQ Cat 5 intercom systems. includes speaker, microphone, and circuit board from OnQ F7596.
MODEL 411-X-SONY - Compatible with Sony Homeshare HD intercom system. Includes outdoor treated 8 ohm speaker.
MODEL 411-X-45 Ohm -Compatible with Valcom, M&S, and any intercom using 45 ohm speakers. Includes outdoor treated 45 ohm speaker.

Keypad

ASCII Format: Selectable baud rate, parity, and mode.
Crestron Format: Compatible with Crestron intercom interface (C2N-IIF)
Stand-Alone 12 Button: 500 codes, 1 relay in keypad, 2 additional relays can be added.
Wiegand Format: 26 bit Wiegand output.

HOLO P/N	Format	No. of Users	No. of Relays	Buttons	Pwr Supply	Illumination	Essex P/N
A	ASCII	Depends on controller type and features	Depends on controller type and features	12	Powered by controller	Illumination can be on all of the time. Must be configured at keypad set-up	K1-26I
CR	For Crestron C2N-IIF	Depends on set-up of Crestron system	Depends on set-up of Crestron system	12	Powered by C2N-IIF	Programmable: ON with button press ON all of the time OFF all of the time	KP-26TI
S12	Stand-alone no controller required	500	1 Plus 2 grounding outputs -external relays required	12	12 VDC 1.25 A supplied	Illumination can be on all of the time. Must be configured at keypad set-up	SKE-26I
W	26 Bit Wiegand	Depends on controller type and features	Depends on controller type and features	12	Powered by controller	Cut jumper wire - turns illumination on all of the time	KTP-102LI

Camera

High Performance B&W Camera

Signal
Pick-up Device
Lens
Illumination
Field of View
Resolution
S/N Ratio
Back Light Comp
Temperature Range
Voltage
Power Consumption

NTSC
1/3” B&W CCD
3.6 mm
0.02 lux
72 degrees
420 lines
more than 46 dB
Auto
14 - 122 degrees F
12 vdc
100 ma

High Performance Color Day-Night Camera SCM510HD-1

Signal
Pick-up Device
Lens
Minimum Illumination
Field of View
Resolution
S/N Ratio
Back Light Comp
Temperature Range
Voltage
Power Consumption

NTSC
1/3” Color Sony ExView CCD 410K
3.6 mm
0.005 lux @ F 1.2
115 degrees
560 lines
more than 48 dB
Auto
-10 - 50 degrees C
12 vdc
100 ma

Finishes

Standard finishes: light oil rubbbed bronze, satin brass, brushed chrome, oil rubbed bronze, and black powdercoat.

Optional finishes: pewter, satin nickle, stainless steel

Model 411 is stocked only in raw brass. Please allow about 2 weeks to have your order finished. All finishes are available.

Oil
Rubbed Bronze