Model 900

Products

Intercom Entry Systems

900 Series

Model 900 Advanced Entry System with Panasonic Network Camera - Flush Mount

Overview

Advanced Entry System with Panasonic Network Camera
• Designed for BB-HCM515 or other similar cameras
• Camera is not included - it is to be supplied by dealer
Features of Model 900
- “Cable” hinge holds unit in horizontal position for easy service
- Integrated 12 vDC power supply (requires only one power supply)
- Tamper switch output can be connected to alarm system
- Auxiliary bell contact provided for automation system or camera / DVR
- Illuminated Essex piezo bell button
- Illuminated keypad
Specify keypad type desired:
- Serial ASCII output 900-A
- Output for C2N-IIF 900-CR
- Stand-alone 12 Button 900-S12
- 26 Bit Wiegand output 900-W
Face plate dimensions: 10.75” x 7.75” (h w)
Back box dimensions 10.125” x 7.125” x 4.25” (h w d)

EXAMPLE PART NUMBER:

900-CR-CR-ORB
Model 900 with Crestron keypad, and Crestron intercom, in oil rubbed bronze finish

MODEL 900-X-CR -Crestron version includes 12 button keypad which is compatible with C2N-IIF. Includes C2N-IIF

MODEL 900-X-VIK* - High performance version using Viking components. System uses “half-duplex” communication, allowing for high speaker and microphone volume. More Details
For Panasonic, use 900-X-VIK with PAN-1 adapter

MODEL 900-CR/VIK - As an option, 2 intercom units are available. Dealers can specify CR/VIK (Crestron/Viking) or VoIP/POTS (VoIP and ordinary telephone unit). Call for details

*NOTE: The “X” in the part numbers above is for keypad specification.

Keypad

ASCII Format: Selectable baud rate, parity, and mode.
Crestron Format: Compatible with Crestron intercom interface (C2N-IIF)
Stand-Alone 12 Button: 500 codes, 1 relay in keypad, 2 additional relays can be added.
Wiegand Format: 26 bit Wiegand output.

HOLO P/N	Format	No. of Users	No. of Relays	Buttons	Pwr Supply	Illumination	Essex P/N
A	ASCII	Depends on controller type and features	Depends on controller type and features	12	Powered by controller	Illumination can be on all of the time. Must be configured at keypad set-up	K1-26I
CR	For Crestron C2N-IIF	Depends on set-up of Crestron system	Depends on set-up of Crestron system	12	Powered by C2N-IIF	Programmable: ON with button press ON all of the time OFF all of the time	KP-26TI
S12	Stand-alone no controller required	500	1 Plus 2 grounding outputs -external relays required	12	12 VDC 1.25 A supplied	Illumination can be on all of the time. Must be configured at keypad set-up	SKE-26I
W	26 Bit Wiegand	Depends on controller type and features	Depends on controller type and features	12	Powered by controller	Cut jumper wire - turns illumination on all of the time	KTP-102LI

Camera

Network Camera from Panasonic - BB-HCM515 or equivalent

Image Compression Video Resolution Image Zoom Image Sensor Viewing Angle Size Voltage	JPEG 1280 x 1024, 640 x 480, etc. JEPG, MPEG4 10x digital zoom 1/4" CMOS sensor 170 horizontal, 102 vertical 3 15/16" x 3 15/16" x 2 15/16" (hwd) POE or powered from internal 12VDC power supply
Please refer to Panasonic for full specifications