VIO 2
VIO2 is a Voice over Internet Protocol Intercom Device, or VoIP Intercom device. It is capable of interfacing with Crestron RAVA and many other VoIP/SIP Servers. It is a Power Over Ethernet Plus Device ( POE+ 25.5w). It utilizes a a single Cat5/6 for voice communication and gate control. VIO2 is capable of interfacing with Crestron RavaSIP as well as most SIP Based IP PBX servers that interface with RFC 3261.
+ TCP/IP, UDP, RTP, SIP, DHCP, Multicast capable
+ Firmware upgradable
+ Relay 1 12vdc @ 700mA (for strike) or dry contact relay (NO, NC)
+ 8 ohm 0.5w speaker output
+ Electret microphone input
+ 802.3at High Power POE+ 25w
+ 2 programmable GPIOs
+ Water / corrosion resistant coating
+ 4.625” x 2.75” x 1.4” (h w d)
For Crestron, specify VIO2(cr)
For Control4, Elan, Savant or standard SIP, specify VIO2(sip)
+ Firmware upgradable
+ Relay 1 12vdc @ 700mA (for strike) or dry contact relay (NO, NC)
+ 8 ohm 0.5w speaker output
+ Electret microphone input
+ 802.3at High Power POE+ 25w
+ 2 programmable GPIOs
+ Water / corrosion resistant coating
+ 4.625” x 2.75” x 1.4” (h w d)
For Crestron, specify VIO2(cr)
For Control4, Elan, Savant or standard SIP, specify VIO2(sip)
COMPATIBLE
+Asterisk
+3Cx
+Control 4 (Driver by Houselogix – Released for BETA TEST July 2015)
+ Crestron
+Cisco
+Elan Release 7.2 (August 2015)
+Savant – Release 5.2.3 (January 2014)
NOT COMPATIBLE
+ Panasonic – Panasonic can be integrated with Viking (sip) VoIP Compatibility Chart
+ Shore Tel
CRESTRON RAVA
VIO2 is a firmware upgradeable device capable of operating on the Crestron Rava Voice over IP network. It integrates seamlessly out of the box to connect to Crestron networks with new Crestron IP touch screens.
